How to use the scraper correctly?

How to use the scraper correctly?

Operation method of scraper

1. Understand the structure and performance of the scraper: Before operating the scraper, we must first understand the structure and performance of the scraper. Including cab, engine, hydraulic system, control rod, wheels, etc.

2. Check the mechanical equipment and hydraulic system of the scraper: check whether the mechanical equipment of the scraper is normal and hydraulic. Whether the amount of oil is sufficient, whether the mechanical equipment is loose, corrosion, etc. After the check, if any abnormal conditions are found deal with it promptly.

3. Getting ready: Before getting on the car, you need to adjust the position of the seat and steering wheel to ensure that you are comfortable and stable. At this time, check whether the instrument indicators of the car body are normal.

4. Start the scraper: Put the key of the scraper into the ignition hole, and then start the engine, let it heat up 1 to 1 two minutes.

5. Adjust the direction: Step on the brake and adjust the steering wheel so that the scraper faces the direction you need to operate.

6. Operation gear: Operate the gear of the vehicle, put the stop rod in a suitable position, such as the position of the front gear, pay attention to the correct gear.

7. Accelerate driving: Release the brake, gently press the accelerator pedal, accelerate the scraper driving, moderate speed, all the way be careful to avoid obstacles.

8. Operation of the forklift: When the destination is reached, the control lever in the hydraulic system is used to operate the forklift and load the materials into the scraper.

9. Unloading materials: After arriving at the loading point, open the unloading valve stem and operate the forklift to unload materials.

10. Turn off the car: After unloading the materials, you can turn off the scraper, close the door, check the body everywhere to ensure everything is fine.

Summary: The above is the basic operation method of the scraper, master the operation skills, strengthen the actual operation, can to improve safety and efficiency, so that the scraper operation to achieve the best experience and operation results.